Please check the inside of the crank handle. Depending on the age, there should be a model number or batch number engraved. See instructions for finding your model number.

If there isn’t a model or batch number visible, please include photos for us to identify the product. Email photos to customerservice@libertygardenproducts.com. There are other manufacturers that have similar designs but will not match our parts.

Common replacement parts can be found here in Replacement Parts Menu.

If the part you need isn’t listed, please email us at customerservice@libertygardenproducts.com .

-½” galvanized tee that is on some of our hose carts

-5’ Leader hose (ours has a standard male and female end)

-Tires - You will have to check the axle housing to make sure it will fit.

-O-rings - We have tested the Danco brand #11 and #12 depending on the model you have. It is a tight squeeze, but they do work with no leaking. Ours are in metric size so they are difficult to find the exact match locally. Danco #11 for 4007, 4009 and 4010. Danco #12 for 4000 and 4008 swivel.

-Bolts and nuts. Sizes vary per model.

If your swivel is leaking water, please check the O-Rings first. Click here to see instructions.

It varies per model. See replacement part section under each swivel.

Replacement Parts Menu

For the 704, click here.
For the 708, click here.

a. For instructions on mounting to a home, watch the video or ask your local hardware company.

b. Same instructions apply for mounting wall mounted hose butlers.

c. For ideas on post mounting, click here.

We test our products using standard grade 5/8” garden hose. Some hoses have thicker walls or have a ¾” ID. Due to the increased diameter of those hoses, the reel will not accommodate the 125’ length advertised. If you do have a ¾” hose, please deduct 50’ per 125’ of our recommended length.

Click here to see instructions.

If you are moving your hose reel around a lot, most customers prefer the four-wheel model. You do have to recline the two-wheel cart while moving. The two-wheel cart has more stability though while unwinding and winding your garden hose.

The 704 is made of cast aluminum. It will not rust.

The 707 is also made of cast aluminum but includes a worm gear for winding hose.

The 708 is a smaller decorative reel made of steel, not cast aluminum. This reel uses a different swivel connector than the 704. Both swivels are made of brass.

125 psi of water pressure

Proposition 65 protects California’s drinking water sources from being contaminated with chemicals known to cause cancer, birth defects or other reproductive harm, and requires businesses to inform Californians about exposures to such chemicals. Due to our brass fixtures containing a small amount of lead, we are required to disclose this. Our fixtures do contain three parts per million of lead. The United States guideline for lead content is 90 parts per million.www.P65Warnings.ca.gov

Our products are manufactured in China and Vietnam with the exception of our metal hose pots which are produced in India. While our products are manufactured outside the U.S., all marketing, product design and customer service is administered from our corporate office in North Carolina.

Our models 692-a and 693 are intended to be mounted in concrete. Our decorative hose stands are made to be pushed into the ground and mobile by stepping on them; however, for the best stability it is recommended to mount those in concrete as well.

See this video for instructions on how to set the decorative hose stands in concrete.

#1 Read what is listed on tire. #2 Check owner's manual. Note: While tire pressures may vary, 15 psi should be a base amount to start. Do not use a compressor to fill the tires. If over inflated, it could explode.

Company warrants solely to the original Customer that (a) the Structural Frame will be free from defects in materials and workmanship under normal use for a period of three (3) YEAR(S) from the date of original retail purchase, and (b) the Non-Frame Parts (which consist of the crank handle, swivel and water connections, leader hose and tires), will be free from defects in materials and workmanship under normal use for a period of ONE (1) YEAR from the date of original retail purchase. Notwithstanding the foregoing, the colors and finishes of the Products may vary within a reasonable scope due to unavoidable color variations in different production batches, and such variations shall not constitute a material defect. This limited warranty is limited solely to the original Customer with proof of purchase and is not transferable.

Kindly review our Warranty Guidelines for additional details.

Please email us at customerservice@libertygardenproducts.com

We require a Proof of Purchase and pictures depending on the problem. In some instances, it’s helpful if we can see the problem to resolve the issue. Be prepared to share videos / photos for better assistance. Kindly review our Warranty Guidelines for additional details.